
Pallet Rack Beams
New and used step beams from 96" to 144" (2.4–3.7 m), rated per pair for your heaviest pallet loads of sugar, beverages or packaged goods.
Explore BeamsFrom coffee export warehouses in Escuintla to retail distribution centers in Guatemala City, we supply new and inspected used components sized for your pallets, forklifts and building height.

New and used step beams from 96" to 144" (2.4–3.7 m), rated per pair for your heaviest pallet loads of sugar, beverages or packaged goods.
Explore Beams
Upright frames in heights for low-bay maquila plants to high-bay distribution centers, with depths matched to 1,000 × 1,200 mm and 48" × 40" pallets.
Explore Uprights
Ideal for Guatemala's ferreterías, lumber yards and steel distributors storing rebar, PVC pipe, tubing and timber without front columns in the way.
Explore Cantilever
Hot-rolled steel with bolted connections and superior forklift impact resistance — the preferred choice for Guatemala's high-seismic regions.
Explore Structural
Tens of thousands of inspected used uprights and beams. Steel racking that has avoided forklift damage performs like new at a fraction of the cost.
Explore Used Racks
Pre-configured starter and adder kits let you build a complete selective rack run without specifying every individual component.
Explore Systems
Prevent pallets and cartons from falling between beams, allow sprinkler water to pass through and support small-item storage on any level.
Explore Wire Decks
Maximize pallet positions per square meter in cold rooms, beverage depots and bulk sugar or flour storage with low cost per position.
Explore Drive-InRacking that works in Indiana is not automatically right for Guatemala. These are the four factors we evaluate on every Guatemalan project before a single beam is shipped.
Guatemala sits where the North American, Caribbean and Cocos plates meet. We recommend structural uprights, wider base plates, proper floor anchoring and row spacers, and we encourage a review by your licensed local structural engineer against the applicable AGIES NSE guidelines.
High humidity along the Pacific coast, Izabal and Petén accelerates corrosion. We specify durable powder-coated finishes and galvanized wire decks for coastal warehouses, cold rooms and open-sided agro-industrial sheds.
Guatemalan supply chains mix 1,000 × 1,200 mm and 48" × 40" pallets. A 42" (1,067 mm) deep frame handles both with roughly 65–75 mm overhang front and back, while 96"–108" beams typically hold two pallets per level.
Shipments are consolidated and labeled by bay for Puerto Quetzal, Santo Tomás de Castilla or overland routes, with commercial documents prepared to support your DUCA customs declaration and CAFTA-DR origin review where applicable.
Compare storage density, pallet access and typical local applications to shortlist the right system before requesting a layout.
| System | Best For | Density | Selectivity | Typical Guatemala Use |
|---|---|---|---|---|
| Selective Pallet Racking | Many SKUs, direct access to every pallet | Retail & consumer goods DCs in Guatemala City and Villa Nueva | ||
| Structural Racking | Heavy loads, high forklift traffic, seismic sites | Industrial plants in Escuintla, Amatitlán and the highlands | ||
| Drive-In / Drive-Thru | Large quantities of few SKUs | Cold storage, beverage, sugar and flour warehouses | ||
| Pushback Racking | 2–5 pallets deep, LIFO rotation | Food & packaging manufacturers with moderate SKU counts | ||
| Cantilever Racks | Long, bulky or irregular items | Lumber yards, ferreterías, rebar and pipe distributors | ||
| Wire Mesh Decks | Safety & mixed-size loads (accessory) | — | — | Pharma, e-commerce picking and fire-protected facilities |
| Pallet Rack Supports | Extra support for weak or partial pallets | — | — | Export pallets of coffee bags and irregular bulk goods |
Final capacities depend on beam length, upright profile, load distribution and site seismic conditions — every layout is confirmed in writing.
Chances are we have it in stock today. Send your floor plan and pallet specs to [email protected] and our team will match the right components.
Our professionals manage projects from start to finish: layout design, permitting assistance, supply, installation guidance and buyout of the equipment you no longer need.
Whether you are opening a new distribution center in Zona 12 or relocating a plant to Escuintla, Guatemala Industrial Racks S.A. coordinates every stage of the project.
Our roots trace back to 1989, beginning in a 3,500 sq ft warehouse and growing to more than 500,000 sq ft of storage equipment inventory. The team specializes in used pallet rack beams and uprights, plus complete system design and installation.
Because pallet racks are steel, components free of forklift damage keep their structural integrity for decades. That experience in sourcing, inspecting and reconfiguring racking lets us deliver reliable used systems to Guatemalan companies at a fraction of new cost — alongside used forklifts, stretch wrap machines, gravity conveyors and complete conveyor systems.
About Us
Some projects simply need new steel: an exact upright height, a specific beam capacity or a seismic-grade structural system. Our manufacturing operation builds new pallet racking and cantilever racking at factory-direct pricing — teardrop, drive-in, pushback, flow and cantilever.
Many Guatemalan clients benefit from combining new and used components. If used uprights fit but beams don't, we build the beams; if the right frames aren't available, we fabricate them. That flexibility keeps your budget in quetzales under control without compromising safety.
Contact Us to Learn More
A transparent, five-step process designed for international B2B buyers.
Share your floor plan, clear height, pallet sizes, weights and forklift specs.
We design rack runs, aisles and load ratings with seismic considerations.
In-stock new and used components are combined with custom-built parts.
Bay-labeled loads with documents prepared for Guatemalan customs.
Drawings, anchoring guidance and coordination with local installers.
Feedback from warehouse managers, food banks, distributors and manufacturers who trust our team.
Practical answers for procurement managers, plant engineers and logistics directors.
Yes. We consolidate racking into containers or flatbed loads for Puerto Quetzal, Santo Tomás de Castilla or overland routes, then coordinate final delivery to warehouses in Guatemala City, Villa Nueva, Mixco, Amatitlán, Escuintla, Quetzaltenango and other departments. See our shipping and returns policy for details.
Guatemala is one of the most seismically active countries in the Americas. For high-risk sites we recommend structural pallet racking, correct base plates, floor anchoring, row spacers and a layout review by a licensed local structural engineer against the applicable AGIES NSE guidelines.
Yes. A 42" (1,067 mm) deep upright frame supports both 48" × 40" and 1,200 mm deep pallets with a small front and rear overhang. Beam lengths of 96"–108" (2,438–2,743 mm) typically hold two pallets per level with safe side clearances.
Used pallet racks reduce capital cost for standard selective storage when components are inspected and undamaged. New or structural racks are recommended for high-bay, high-traffic or high-seismic installations and when exact sizes or capacities are required.
Send your floor plan, clear ceiling height, pallet dimensions and maximum load weight, forklift type and lift height, and the Guatemala delivery location to [email protected], or use our Get a Quote page.
Yes. We evaluate used pallet racks and material handling equipment for buyout or trade-in allowances when you relocate, consolidate or upgrade. Learn more on our Sell Your Rack page.