Pallet Live Rack Push Back Pallet Rack

Product Description

Push-back pallet rack banner
Products Description
Push-back pallet rack is for high density storage. The depth is usually within 5 pallet positions. The rack takes "first-in-last-out (FILO)" access mode.
Characteristics
  • Applicable to warehouses with high cost per unit area, such as cold storage, warehouses in prime locations in downtown, etc.
  • Provide 20%-30% selectability.
  • Both safety and operating efficiency are higher than drive-in racks (drive through racks).
  • Compared with adjustable pallet rack, it increases the utilization rate of the ground by about 60%.
  • It can be used with a reach forklift or a counterbalanced forklift, and the forklift operation requirements are lower than drive-in pallet rack.
Components Overview

The main components are upright frames, beam, support rail, and carrying cart. The rack is bolted structure and easy to dismantle and install to a new place.

Rack Components Structure
Middle Cart
Middle Cart

Made of square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearing. Design could be different as clients' needs.

Small Cart or 1st Cart
Small Cart or 1st Cart

Made of angle steel, square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearings. Design could be different as clients' needs.

Protect Rail
Protect Rail

Made of C-shape or U-shape steel. When ground level need no carts and pallet placed directly on ground. Protect rail is recommend.

Product Information
Rack Type push back pallet rack
Rack Cost Low, Medium Low, Medium, √Medium high, High, Higher
Pick-up Mode first in, last out (FILO)
Structure knock down or bolted
Forklift Aisle around 3200mm, depends on customer's forklift parameter
Load Capacity & Dimension Load capacity: ≤1500kgs/pallet
Size: customized based on clients pallet
Components Core components: frame (upright, also called column or post, bracing, base plate, fasteners), beam, support rail, cart, spacer
Other: upright protector, frame protector, guide rail, protect mesh
Core Components Specification Upright (mm): 80*60, 90*60, 90*70, 100*70, 120*95, 120*135
Beam (mm): 80*50, 100*50, 110*50, 120*50, 130*50, 140*50, 160*50
Finish Epoxy resin electrostatic spraying (powder coating), galvanized
Coating Thickness no less than 60um for average thickness for powder coating
Material Q235B, or Q355
Color RAL5015 (sky blue), RAL5005 (signal blue), RAL2004 (pure orange), RAL1003 (signal yellow), RAL7035 (light grey)
Customized colors are available when order above 2*40GP containers
Store & Withdraw
Loading Process:

Carrying cart runs along the inclined support rail. 1st pallet is placed on the carrying cart, 2nd pallet pushed back 1st pallet into the rack, 3rd pallet push the front 2 pallets into rack, the rest keep the same operation.

Unloading Process:

Pallet at the pick-up end is carried out first, the next pallet slides to the pick-up point by gravity for unloading, other keep the same. Unlike drive in pallet rack, forklift truck don’t drive into the rack.

Store and Withdraw Operation
Product Gallery
Rack Detail 1
Rack Detail 2
Rack Detail 3
Rack Detail 4
Rack Detail 5
Rack Detail 6
Rack Detail 7
Recommend Products
Our Services
Our Services Overview
Packaging & Shipping

To suit different clients' needs, HBrack uses different storage methods. The rules followed include:

  • For container order: Stretch film + carton board + packing belt + plywood stick + plywood pallet leg.
  • For less than container order: Plywood box or other materials that ensure product safety during transportation.
  • Other options: Customized based on clients' requirements, such as vacuum packing, etc.
Packaging Example 1
Packaging Example 2
Buying Guides
Buying Guide Step 1
Buying Guide Step 2
Company Information

Nanjing Hongbo Metal Products Co., Ltd. (hereafter mentioned as HBrack) is a company full of vitality committed to providing clients with better metal products and services. HBrack has designers who have been in warehouse rack design for more than 10 years and have rich experience with complex structures.

The products provided include adjustable pallet racking, shelving, cantilever racking, drive-in racking, mezzanine floor, live racking, drawer racking, stacking rack, wire container, steel pallet, steel cage, and other warehouse storage-related products.

Services provided include storage rack design, production, and installation, ranging from common pallet racks to complex mezzanine floors.

Company Banner
Frequently Asked Questions
Q1 Are you a factory or a trading company?

We are a factory and also engage in trading products related to warehouse racks.

Q2 Do you provide samples? Is it free or extra?

We provide sample parts free of charge, and you only need to pay the freight. If you require a complete sample rack for testing feasibility, please contact us for the sample cost.

Q3 Which city are you located in, and how can I visit?

We are located in Nanjing. When needed, we can assist you with hotel bookings and transportation tickets, as well as pick you up. Our sales representatives and drivers will accompany you throughout your visit.

Q4 What experience does HBrack have in rack design?

HBrack has engineers with over 10 years of professional experience in warehouse rack design, capable of handling structures ranging from simple to complex.

Q5 How does HBrack ensure transaction safety?

Your payment is safe with HBrack. We accept transactions through trusted 3rd party platforms. Furthermore, our sales personnel have extensive experience in warehouse racking, and all personal information is fully trackable.

Q6 Can HBrack assist with budget management?

Yes, HBrack offers versatile design solutions tailored to help clients manage and control their project budget effectively.

HBrack Contact Information

Related Products